How Bed Bugs Kill

US EPA

Bed Bugs

Do-it-yourself Bed Bug Control

Can you get rid of bed bugs on your own?

Treating bed bugs is complex. Your likelihood of success depends on many factors, including:

  • How many bed bugs you have;
  • How much clutter is available for hiding places;
  • Whether your neighbors have bedbugs; and
  • Whether all residents of a house or building will participate.

Getting rid of bed bugs completely can take weeks to months, depending on the nature and extent of the infestation. To be successful, everyone will need to cooperate and do their part.

The following steps will help you begin:

You may have to follow these steps more than once to kill all the bugs and their eggs.

Identify the Problem

  • Identify the pest:
  • Collect a sample of the pest to show an extension agentExitor other insect expert.
  • Extension agents can identify the pest at no cost to you. They are trained in pest control and know your local area.
  • If an extension agent or other expert says the pest is a bed bug, notify your landlord if you live in an apartment. The units near yours should be inspected.
    • Landlords may have a responsibilityExit to participate in treatment.
    • Check the housing codes and laws in your area.
    • Inspect all areas that may have bed bugs, plus surrounding living spaces, to find out the extent of infestation.
    • Develop a Strategy

      • Make a schedule for completing the steps below. Be sure to include any personal plans, such as vacations.
      • Keep records through the whole process. Note the dates and exact locations where pests are found. This will help you track progress and better know where to target your work.
      • Keep checking for at least a year after you’re done to make sure all the bed bugs are gone.

      Keep the Infestation from Spreading

      • Remove infested items. Place them in a sealed plastic bag and treat them. Learn more about treatment methods in the sections below.
      • Items that cannot be treated should be placed in a sealed plastic bag and left there for up to a year to ensure any active bugs are dead.
      • Empty the vacuum after each use. Seal the bag as tightly as possible and immediately throw it out in an outdoor trash container.
      • Discard furniture responsibly if you can’t safely eliminate the bed bugs. Destroy it so someone else won’t be tempted to bring it into their home. For example:
      • Rip covers and remove stuffing from furniture items.
      • Use spray paint to mark furniture with "Bed Bugs."
    • Have infested items picked up as soon as possible by the trash collection agency.
    • Don’t discard furniture if you can safely eliminate the bed bugs from it.
    • Prepare for Treatment

      Preparing for treatment is very important; it will make it easier to monitor for bed bugs that haven’t been eliminated. This preparation should be completed whether you are doing the treatment yourself or hiring a professional.

      Kill the Bed Bugs

      • Make sure the methods you select are safe, effective and legal. See What’s Legal, What’s Not.
      • Considernon-chemical methodsof killing bed bugs. Some will be more useful than others depending on your situation. These and other methods can be helpful, but they might not get rid of the infestation entirely:
      • Heat treatment:You can use a clothes dryer on high heat. You can also use black plastic bags in a hot, closed car in the sun, but success depends on your climate and other factors. Do-it-yourself heat treatments might not work. Professionals have access to more intensive and proven methods that can even treat whole houses with heat. You may also purchase a portable heat chamber, which is usually quite effective.
      • Cold treatmentcan be successful in the home environment if the freezer is set to 0 o F. You must leave the items in a sealed bag in the freezer at that temperature for four days. Always use a thermometer to check the temperature, since home freezers are not always set to 0 o .
      • Steam cleaners(wet or dry) can get into cracks and fabrics to treat carpets, baseboards, bed frames, and other furniture. The steam temperature must be at least 130 o F but should not have a forceful airflow, or it may cause bed bugs to scatter. Use a diffuser to prevent scattering.
    • If needed,hire a pest management professional or use pesticidescarefully according to the label directions:
      • Look for EPA-registered pesticides that have bed bugs listed on the label.
      • Use foggers (bug bombs) only with extreme care and only if bed bugs are listed on the label. Improper use can harm your health or cause a fire or explosion. Foggers should not be your only method of bed bug control. The spray will not reach the cracks and crevices where bed bugs hide. See Should I Use a Fogger? for more information.
      • Carefully look for any evidence of bed bugsevery few days after you complete your initial cleanup and control processes.If you see bed bugs, either the initial cleanup missed some bugs or eggs have hatched. Retreatment may be needed.
      • Consider using different types of pesticides if repeated treatments are needed.Desiccants (chemicals that dry things out) can be particularly effectivein some situations since they work by drying out the bug (which means the bed bugs can’t develop resistance).
        • If using desiccants, be sure to use only products registered by EPA as a pesticide.
        • Do not use pool- or food-grade diatomaceous earth(made from the fossilized remains of tiny, aquatic organisms called diatoms). This type of diatomaceous earth can harm you when you breathe it in. The pesticide version uses a different size of diatoms, which reduces the hazard.
        • Desiccants can be very effective but may take several months to work.
        • Evaluate and Prevent

          • Continue to inspect for bed bugs, at least every 7 days, in case any eggs remain. You can use interceptors, traps or other monitoring methods. Interceptors are placed under the legs of furniture to catch bed bugs and keep them from climbing the legs. Commercial and do-it-yourself interceptors are options.
          • Continue to protect your home from bed bugs.

          For additional information, please see : The following links exit the site Exit

          Contact Us to ask a question, provide feedback, or report a problem.

          What Temperature Kills Bed Bugs?

          Can Heat or Cold Kill Bed Bugs?

          While bed bugs are sensitive to changes in temperature, there are plenty of myths about what temperature kills bed bugs.

          The pests cannot be eliminated simply by turning off heaters in winter or sitting infested items outdoors on a sunny summer day. In fact, only extreme temperatures beyond what can be achieved naturally will get rid of them.

          Temperature-Related Bed Bug Control

          Using freezing cold temperatures to kill bed bugs is one option. Put an infested object, such as bedding or pillows, in a sealed plastic bag, then put it in a freezer at zero degrees Fahrenheit for about four days.

          Temperature That Kills Bed Bugs

          A similar process can be used with heat. Adult bed bugs die at 119 degrees Fahrenheit, and their heat-resistant eggs require temperatures upwards of 125 degrees. Some infested objects can be safely baked in the oven at these temperatures for three to five hours to get rid of the pests.

          Safety should always be considered in deciding whether to treat in this manner.

          Frozen carbon dioxide sprays and heat distribution systems exist but require special equipment and expert monitoring.

          The Whole-Home Bed Bug Solution

          Homeowners can use extreme temperature to kill bed bugs in a limited sense, but DIY heat or cold treatments aren’t a practical solution for house-wide infestations. In addition to letting bed bugs in floorboard cracks and walls escape, this control method won’t work for infested items that aren’t safe in extreme conditions or too big to fit in the freezer or oven.

          The pest specialists at Orkin have a wide variety of tools and knowledge at their disposal and are able to assess the situation to find the best bed bug solution for your home.

          How to Get Rid of Bedbugs

          Bedbugs measure just 5 millimeters across—smaller than a pencil eraser. These bugs are smart, tough, and they reproduce quickly. Bedbugs know where to hide to avoid detection, they can live for months between meals, and a healthy female can lay 500 eggs in her lifetime.

          No surprise that these tiny bloodsuckers can wreak a lot of havoc in your home. If they get into bed with you, they can leave red, itchy welts all over your body.

          Fortunately, you can get rid of bedbugs. Be patient as removing bedbugs often takes some time and effort. You may have to try a few different chemical and non-chemical approaches, especially if you have a large infestation.

          Certain factors can make bedbugs harder to remove. You may have a tougher time ridding your home of them if you have a lot of clutter, or you travel often and bring new bedbugs home in your luggage.

          If you can’t rid your home on your own, you may have to call in a professional exterminator. Read on for a step-by-step guide on getting rid of bedbugs.

          If you’ve got bedbugs, you want to find them early before they start to reproduce. It’s much easier—and cheaper—to treat a small infestation than a big one. Yet smaller infestations can be harder to detect.

          Search for bedbugs yourself, or hire a professional to do an inspection. Some inspectors use specially trained dogs to hunt down bedbugs by scent.

          Bedbugs’ small, narrow bodies enable them to squeeze into tiny spots—like the seams of a mattress or couch, and the folds of curtains.

          Also look for them in places like these:

          • near the tags of the mattress and box spring
          • in cracks in the bed frame and headboard
          • in baseboards
          • between couch cushions
          • in furniture joints
          • inside electrical outlets
          • under loose wallpaper
          • underneath paintings and posters on the walls
          • in the seam where the wallpaper and ceiling meet

          Use a flashlight and magnifying glass to go over all of these areas.

          You can spot bedbugs by these signs:

          • live bedbugs, which are reddish and about ¼-inch long
          • dark spots about the size of a period—these are bedbug droppings
          • reddish stains on your mattress from bugs that have been crushed
          • small, pale yellow eggs, egg shells, and yellowish skins that young bedbugs shed

          Once you find a bedbug, put it in a sealed jar along with 1 teaspoon of rubbing alcohol. Other types of bugs can look a lot like bedbugs. If you’re not sure what type of bug you’ve found, bring it to an exterminator or entomologist to identify.

          Once you know you have bedbugs, you need to keep them contained so you can get rid of them. A quick and easy way to trap bedbugs is with your vacuum. Run the vacuum over any possible hiding places.

          This includes your:

          Seal up the vacuumed contents into a plastic bag and throw it away. Then thoroughly clean out the vacuum.

          Seal up all your linens and affected clothes in plastic bags until you can wash them. Then put them on the highest possible temperature setting in the washer and dryer. If an item can’t be washed, put it in the dryer for 30 minutes at the highest heat setting.

          Anything that can’t be treated in the washer and dryer, place in a plastic bag. Leave it there for a few months, if possible, to make sure all the bugs die. If you can’t clean furniture, throw it away. Tear it up first and spray paint the words “bedbugs” on it so no one else tries to take it home.

          Before you start treating your home, do a little prep work to maximize your odds of success. Make sure all your linens, carpets, drapes, clothing, and other hiding places have been cleaned or thrown out (see Step 2).

          Next, get rid of bedbug hiding places. Pick up books, magazines, clothes, and anything else that’s lying on your floor and under your bed. Throw out whatever you can. Don’t move items from an infested room to a clean one—you could spread the bugs.

          Seal up any open areas. Glue down loose wallpaper. Caulk cracks in furniture and around baseboards. Tape up open electrical outlets. Finally, move your bed at least 6 inches away from the wall so bedbugs can’t climb on.

          Home cleaning methods

          You can first try to remove bedbugs without chemicals. These bugs are pretty easy to kill with high heat, 115°F (46°C), or intense cold , 32°F(less than 0°C

          Here are a few ways to treat bedbugs using these methods:

          • Wash bedding and clothes in hot water for 30 minutes. Then put them in a dryer on the highest heat setting for 30 minutes.
          • Use a steamer on mattresses, couches, and other places where bedbugs hide.
          • Pack up infested items in black bags and leave them outside on a hot day (95 degrees) or in a closed car. In cooler temperatures, it can take two to five months to kill sealed-up bugs.
          • Put bags containing bedbugs in the freezer at 0°F (-17°C). Use a thermometer to check the temperature. Leave them in there for at least four days.

          Once you’ve cleaned all visible bedbugs, make the area inhospitable for their friends. Place bedbug-proof covers over your mattress and box spring. Zip these covers up all the way. Bugs that are trapped inside will die, and new bugs won’t be able to get in.

          If these methods don’t wipe out all the bugs, you may need to try an insecticide.

          Non-chemical and chemical treatments

          Insecticides can help rid your home of bedbugs. Look for products that are EPA-registered, and specifically marked for “bedbugs.”

          Here are a few types of insecticides you can try:

          • Pyrethrins and pyrethroidsare the most common chemicals used to kill bedbugs. Yet some bedbugs have become resistant to them.
          • Pyrroleslike chlorfenapyr kill bedbugs by disrupting their cells.
          • Neonicotinoidsare man-made versions of nicotine. They damage the bugs’ nervous system. This type of chemical works on bedbugs that have become resistant to other pesticides.
          • Dessicantsare substances that destroy the bugs’ protective outer coating. Without this coating, the bugs dry out and die. Two examples of dessicants are silica aerogel (Tri-Die and CimeXa) and diatomaceous earth. The advantage to dessicants is that bedbugs can’t become resistant to them, but they work slowly. These products can take a few months to kill off all the bugs.
          • Foggers or bug bombskill bedbugs, but they can’t get into cracks and crevices where these bugs hide. They can also be toxic to humans if you use them incorrectly. Read the label carefully. Leave the room before you set off a fogger.
          • Plant oil-based products likeEcoRaider and Bed Bug Patrol are less toxic than chemical insecticides, and they work well against bedbugs.

          Bed Bug Control – How to Get Rid of Bed Bugs

          Bed Bug Pre-treatment Procedures

          1. Reduce Clutter
          2. Launder Infested Garments and Linens
          3. Dismantle Bed Frames
          4. Remove Dresser Drawers
          5. Clean the Area
          6. Caulk and Seal

          Reduce Clutter:

          Remove all personal items (stuffed animals, soft toys, blankets, electronics, etc) and anything that does not stay in the room permanently.Caution:Be mindful that items from the infested area can transfer bed bugs to other areas. It is best to bag them in plastic with Nuvan Strips.

          Launder Infested Garments and Linens:

          Infested garments and bed linen cannot be treated with insecticide. They need to be laundered in hot water (120 degrees fahrenheit minimum). If washing is not available, heating the garments or bed linens for several minutes in a clothes dryer may work.

          Dismantle Bed Frames:

          Dismantling bed frames in infested areas typically exposes bed bug hiding sites. Having access to these areas during cleaning is important. Stand up the box spring and shine a flashlight through the gauze fabric and look for bed bugs. If the fabric is torn (possible hiding place), remove fabric to prepare for spraying. If the mattress and or box springs are infested, you may want to consider Encasements by Mattress Safe. Once covered with these encasements, bed bugs can not enter or exit. There is no need to treat the mattress or box spring when using these encasements. Keep them on for a year.

          Remove Dresser Drawers:

          Remove drawers from desks and dressers since bed bugs like to hide in these areas. Turn furniture over to inspect and clean all hiding spots. All furniture should be pulled away from the walls.

          Clean the Area

          Scrub infested surfaces with a stiff brush to dislodge eggs. Vacuum the room extensively. Use a vacuum hose attachment to thoroughly vacuum cracks and crevices on furniture and along baseboards on the walls. Vacuum along baseboards, furniture, bed stands, rails, headboards, foot boards, bed seams, tufts, buttons, edges of the bedding, as well as the edges of the carpets (particularly along the tack strips). A good vacuum cleaning job may remove particles from cracks and crevices to encourage greater insecticide penetration. Bed bugs cling tightly to surfaces, so it is best to vacuum by scraping the end of the vacuum attachment over the infested areas to pull out the bed bugs.Caution:It is not good to use a bristle attachment, because you may transfer bed bugs to other areas since they cling to the brush. Dispose of vacuum cleaner bags after you are finished in an outdoor trashcan.

          Caulk and Seal

          Caulk and seal all holes where pipes and wires penetrate walls and floor, and fill cracks around baseboards and molding to further reduce harboring areas.

          Bed Bug Inspection

          Bed Bug Appearance

          Bedbug Pictures: What does a bed bug look like?

          Adult bed bugs are brown to reddish-brown, oval-shaped, flattened, and about 1/4 to 5/8 inch long.Note:Their flat shape enables them to readily hide in most cracks and crevices.


          Adult Male Bed Bug

          Adult Female Bed Bug

          Bed Bug Nymph

          Tip:Eggs are not placed on the host’s body (the person sleeping in the bed), but the eggs are found on surfaces near where the host sleeps.

          Bed Bug Inspection Tips:

          • Look in any place that offers darkness, isolation and protection to the bed bug.
          • Inspect adjoining rooms where an infestation is found. Even when the bed bugs themselves cannot be found, their hiding places can be located by looking for the spots of fecal material they often leave.
          • Use an Insecticide Aerosol such as CB-80 or PT 565 to flush the bed bugs out of suspected hiding places. These aerosols kill on contact, but the idea is to flush them out for inspection

          Bed Bug Inspection Check List

          The Mattress and Box Spring

          Check the mattress throughly, paying close attention to seams and tufts along the edges. Flip the mattress over and inspect the bottom carefully as well. Pay particular attention to any rips in the fabric. View the fabric on the bottom of the box spring and shine a flash light to verify that bed bugs have not penetrated the interior of the box spring.

          Bed Frame and Head and Foot Boards

          Remove the mattress and box frame from the bed frame and shine a flash light all along every potential hiding place on the bed frame. Remember bed bugs can slip into an crack a business card can fit into.

          Other Furniture: Desks, Chairs, Dressers, etc

          Take out all drawers and cushions from surrounding furniture. Check all seams and crevices carefully with a flashlight. Take your time and inspect thoroughly. Bed Bugs are commonly found in these areas in an infested room.

          Walls and Carpet

          Inspect the surrounding walls by removing electircal switch plates and any wall hangings. Check under tack strips and behind baseboards where ever possible. Shine light into cracks in plaster and seams along wall paper.

          Electronics and Other Applicances

          Unfortunately electronics and appliances provide a perfect hiding spot for bed bugs. Check them closely with a flashlight and magnifying glass as well. Remove them when possible. Placing smaller ones in a bag with Nuvan Strips is an effective way to save the device.

          Additional Bed Bug Inspection Notes

          Bed Bug fecal and blood spots (look like rust) are left on sheets and pillowcases when the engorged bed bugs are crushed. These indicators serve as sure signs of infestation. Bed bugs prefer to hide in cracks and crevices during the daytime and come out to feed on the host’s blood at night, usually while the host is sleeping.

          Since bed bugs can flatten their bodies, they fit in very small crevices, specially around the bed area. They are found in habitual hiding places, preferably close to a blood meal. Even though their preference is to be close they can travel several feet for a blood meal.

          Initial infestations tend to be around beds, but the bugs eventually become scattered throughout a room, occupying any crevice or protected location. They can also spread to adjacent rooms or apartments.

          Bed Bug Treatment Procedures (Part A)

          Do I Have to Throw Out the Mattress?

          This question is answered by the condition of the mattress and the size of infestation. If there are holes or tears in the gauze fabric or fabric of the mattress, bed bugs and eggs may be inside, as well as outside. There are restrictions on how beds can be treated with insecticides. We carry both Mattress Safe Bed Bug Encasements and ActiveGuard Mattress Liners.

          1. Mattress Safe Encasements: Mattress Safe Products are bed encasements to place over your mattress or boxspring so you don’t have to throw them away. They are bedbug certified. If using a labeled insecticide on the mattress or boxspring first, apply on mattress or box springs then zip it up. It has a patented hook to keep the bed bugs inside the encasement so they cannot escape. Keep the encasement in place for one year (due to bed bug life cycles).

          2. Active Guard Liners:Active Guard Mattress Liners may be placed on beds and are effective as both preventative and active bed bug treatments. They kill bed bugs and dust mites within 72 hours and will prevent bed bugs from infesting mattresses. ActiveGuard Liners act like a fitted sheet; it comes in single, full, queen, and king sizes that fit up to 17" in depth.

          If you decide against Mattress Safe Encasements or ActiveGuard Liners, use insecticides labeled for beds such as Steri-Fab, Cimexa Dust, Phantom Aerosol, Bedlam Aerosol, or Temprid FX (See below).

          How to treat the mattress with insecticides:

          Look carefully at the folds and seams of the mattress, the headboard, foot board (if present), box spring/support platform, frame, etc for bedbugs and treat these area after vacumming.

          The following residual insecticides and dusts are labeled to spray and dust mattresses:

          Dusts last longer than aerosols, but the crack and crevice tips on the Phantom and Bedlam areosols enable you to get into the smallest cracks. It is a good idea to use a combination of sprays and dusts. Temprid SC may be used on the tufts and seams of mattresses. It works well as a residual insecticide sprayed in other recommended treatment areas such as night stands, chests, dressers, couches and chairs.

          Bed Bug Treatment Procedures (Part B)

          Treat all baseboards and furniture (Night Stand, Chests, Dressers, Couches and Chairs)

          Bed Bug Treatment: Sprays and Dusts

          There are several products on the market that work well for bed bugs:

          It is best to use a combination of these products for application purposes.

          You can get these at discounted rates in be form of kits: Bed Bug Kits
          The kits have the residual insecticide with the dust and aerosols.

          Spray liquid insecticides or aerosols:

          • Spray around and under the bed and along the baseboards near the bed. After removing the drawers from the furniture, the inside of the cabinetry should be sprayed as well as the bottom and sides of the drawers. Do not treat the inside of the drawers. If needed the clothes in the drawers should be removed and laundered.
          • Spray around the inside of closets, door frames and doors.
          • Spray molding at the top and bottom of the room. Spray around windows.
          • Spray seams of drawers, both top and bottom. Spray dressers from below. Spray where dressers touch the floor.
          • Spray where the bed touches the floor, spray chairs and underneath chairs.
          • Spray all baseboards, loose plaster, behind bed frames and headboards, beneath beds and furniture, and bedsprings and bed frames. Do not apply to furniture surfaces or mattresses where people will be laying or sitting unless using a product labeled for that type of treatment. Infested bedding should not be treated, but should be removed, placed in sealed plastic bags, and taken for laundering and drying at high temperature.

          Recommended Liquid Insecticides-Transport Mikron and Temprid FX

          Spectre 2 SChas a low odor and is not dectectable by the bed bugs. Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can’t get into the cracks and crevices use one of the aerosols described below with it’s crack and crevice tips to reach into these areas.

          • Mix 3 oz per gallon or 0.75 oz per quart and spray with a low pressure sprayer into the areas where the bed bugs are hiding. Typical areas include bed frames, headboards, under beds, baseboards, moldings, behind pictures,etc. Remember to apply in the joints and crevices of furniture. If the crack and crevice is too small, use an aerosol with a crack and crevice tip (recommendations are below.)
          • You may spray mattress seams, zippers and tufts. Wait until it dries before remaking the bed.
          • Remember- 95% of the bed bug infestation will be within five feet of your bed.

          CrossFire Bed Bug Insecticide

          CrossFire Bed Bug Concentrate has two different active ingredients for dual modes of action (both a quick kill and residual activity). Mix 3 oz of CrossFire Insecticide with one gallon of water or 0.75 oz per quart (Remember to use what you mix-within 24 hours.) Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can’t get into the cracks and crevices use one of the aerosols described below with it’s crack and crevice tips to reach into these areas.

          • Apply as a coarse, low-pressure spray to harborage areas including crevices, baseboards, loose plaster, behind bed frames and headboards, beneath beds and furniture, and to bedsprings and bed frames. After removal of bed linens, apply Transport Mikron to mattress and boxsprings. Apply to tufts, edges, seams and folds (do not spray clothes or bed linens). Your may apply it to furniture, but not to areas where there is direct access to seating or arm placements. Infested bed linens should not be treated, but should be removed, placed in sealed plastic bags, and taken for laundering and drying at high temperatures.
          • Apply as a crack and crevice treatment to all baseboards, loose plaster, behind pictures and mirrors, moldings, beneath floor coverings and carpets, closets, shelves, curtains, furniture and picture frames that may provide harborage to bed bugs.
          • Remember- 95% of the bed bug infestation will be within five feet of your bed.

          Temprid FX Insecticide

          Mix 8 ml (about 1/3 oz)(measurements on the bottle) or one 8 ml vial of Temprid FX with one gallon of water. Remember to use what you mix-within 24 hours. Adjust the spray pattern to a mist by turning the nozzle. A low fine mist is best for most spraying, but you may need to use a stream to get into some cracks and crevices. If you can’t get into the cracks and crevices use one of the aerosols described below with it’s crack and crevice tips to reach into these areas.

          • Temprid FX controls bed bug populations that are resistant to pyrethroid insecticides.
          • For infested mattresses, remove linens and wash before reuse. Apply Temprid to tufts, seams, folds, and edges until moist. Allow to dry before remaking bed. Do not spray bed linens
          • Apply Temprid FX to bedsprings, box springs, and the interior of bed frames or headboards, including all cracks and joints.
          • When bed bugs are found in upholstered furniture, apply only to the infested tufts, seams, folds and edges, but do not apply to flat surfaces where prolonged human contact will occur. If bugs heavily infest furniture (inside cushions and/or batting) apply a labeled insecticide dust or consider fumigation.
          • Apply as a crack and crevice treatment to all baseboards, moldings, beneath floor coverings and carpets, closets, shelves, curtains, furniture and picture frames that may provide harborage to bed bugs.
          • Remember- 95% of the bed bug infestation will be within five feet of your bed.

          Recommended Aerosols-Aerosols are perfect for application where you can not spray liquid mixtures.

          Aerosols (D-Fense NXT, Crossfire Aerosol, or Bedlam Plus) Usage:Simply attach the plastic tip to the aerosol can. Apply as a crack and crevice or spot treatment where evidence of bed bugs occurs. This includes bed frames, box springs, inside empty dressers, clothes closets, curtain rods, hollow spaces, carpet edges, high and low wall moldings and wallpaper edges.

          Best Thing to Kill Bed Bugs – Top 10 Products in 2020

          The best thing to kill bed bugs is to go against them with full force. You’ll need a variety of products that we’ve gathered for you in one place. Using just one or two may give you a head start. But bed bugs are sneaky and tough, so you want to be sure to do the job well. Bear in mind that it’s no easy task and you may need the help of a professional.

          To find out more about bed bug bites and how to handle them, check out our article onWhat To Do for Bed Bug Bites.

          Steam Cleaner for Bed Bugs

          Bed bugs are fond of heat but only to a certain extent. They cannot stand heat above 120°F (49°C). This is why a steamer is the perfect tool for getting rid of bed bugs in a natural way. If you had just one option to go with, this would really bethebest thing to kill bed bugs. The steam can access places that are otherwise out of your reach. Such as the inside of your mattress and all the crevices of the bed that are hard to notice. As a bonus, the steamer not only kills the nymph or adult bed bugs, it also gets rid of the eggs.

          Be careful though, as the steam is hot. When used without proper caution, it can cause serious burns. Always turn to the product guide for more information on how to handle it.

          ThisPure Enrichmentsteamer is our favorite because of the large number of components. It can sometimes be hard to reach certain areas but the different brushes of this steamer help get to those places as well.

          Price:Starting at $117

          Zitronikoffers a steamer that is easy to carry around thanks to its size. On the flipside, smaller size also means that it can contain less water, so you may have to refill it more often.

          Price:Starting at $83

          Vapamore’sMR-100 Promo Steam Cleaner is for those who can spear a bit more. It’s a powerful tool with more accessories than many other products. It’s perfect for getting rid of bed bugs, as well as cleaning the rest of the house chemical free. The lifetime warranty is not a bad addition either.

          Price:Starting at $294

          UV Vacuum for Bed Bugs

          Ultraviolet vacuum cleaners are another excellent way of fighting bed bugs. There are numerous vacuums on the market that are designed for more general usage. But Housemile has created a vacuum specifically for eliminating bed bugs, dust mites and allergens. First, the 3800 times per minute vibrations beat out bed bugs from inside your mattress or other upholstery. Next, they are sucked into the machine. Finally, the ultraviolet light penetrates their outer skin and exterminates them.

          Housemile‘s UV Vacuum Cleaner is an indispensable tool at an affordable price. Designed for cleaning your home from bed bugs, allergens and dust mites, it’s easy to use and gives good results.

          Price:Starting at $70

          Bed Bug Sprays

          There are a lot of sprays that promise to get rid of bed bugs quickly. Sadly most of them are not doing the job. Or they’re full of chemicals that can hurt your children or pets.

          EcoRider’s bed bug killer is the best bug spray out there. It’s natural, so it won’t be harmful to your kids or pets. But it’s lethal for bed bugs.

          Price:Starting at $17

          Mattress Encasements for Bed Bugs

          Bed bugs usually hide in the box spring, the mattress, and the bed frame. So the first step is to start protecting the most vulnerable place – your bed. Zippered mattress encasements are used for both the mattress and the box spring. The encasements will act as a protective layer around the box spring and the mattress. If you think there might be bed bugs hiding in either of them, leave the encasement on for 18 months. This will ensure that any bugs hiding on the inside will die, as they won’t be able to feed.

          TheUtopiaBeddingmattress encasement is waterproof, fits well, has a good quality zipper. It’s a great value for the price.

          Sizes:California King, King, Queen, Full, Twin, Twin XL

          Price:Starting at $18

          The Hospitology mattress encasement is easy to put on, even by yourself. The material is soft and comfortable, while still strong and durable.

          Sizes:King, Queen, Full, Twin, Twin XL

          Price:Starting at $32

          Glue Traps for Bed Bugs

          This a neat trick to protect your bed frame. If the intruders in your bedroom are hiding in the walls or other pieces of furniture, they’ll want to make their way to your bed during the night. You can stop them by placing glue traps under and around your bed legs. Blue traps are boards that are covered with strong glue. The glue is strong enough to catch a mouse. And it’s great for catching bed bugs that are trying to sneak into your bed.

          Safariglue traps are reliable and effective. Although originally created for catching mice, they are perfect for getting rid of bed bugs who get stuck to the strong glue. Does not contain toxins or poisons.

          Price:Starting at $17

          Pillow Encasements for Bed Bugs

          Pillows are another hiding place for bed bugs. The best way to make sure yours are not filled with unwanted insects is to get a pillow encasement. It’s function is similar to the mattress encasement. The best pillow encasements are zippered, to make sure that no bed bugs will sneak out.

          SureGuard‘s pillow encasement has a quality zipper that prevents any bed bugs from getting out. The 100% cotton surface leaves a smooth feel to the touch.

          Sizes:King, Queen, Standard, Body, European, Toddler/Travel

          Price:Starting at $28

          Linenspa‘s zippered pillow encasement will do a good job fighting against bed bugs. It’s made of polyester and thus a slightly cheaper than the natural cotton one from SureGuard.

          Sizes:California King, King, Queen, Full, Full XL, Twin, Twin XL, Standard

          Add Comments: